|
Capitoline Products
Standards:
-
All products exceed the ANSI A161.2
standard for countertops.
-
Available in 8’, 10’ and 12’ lengths
-
Standard postform grade laminate with
thickness of 0.040 + or – 0.005”
-
Both standard and special styles and
sizes are suitable for all residential, commercial, institutional
or light industrial applications.
-
Available surfaced with any major
brand of decorative laminate.
Plywood Substrate Specifications:
Specifications for plywood
substrate use in the manufacturing of postformed countertops, end
splashes and High Pressure Laminated Panels are as follows for both
domestic and imported plywood.
Domestic Plywood, AC Fir
(Exterior)
-
Grade A veneer shall be firm,
smoothly cut and free of knots, pitch pockets, open splits and
other open defects and well joined when of more than one piece.
Synthetic fillers shall only be used to fill.
-
Grade C plugged face veneer are
identified as fully sanded. Sanding defects shall not exceed 5
percent of the panel area.
Import Plywood, Virola
PBB/CC (Exterior)
-
PBB/CC and overlay core grades shall
have no more than five core components matched for color and
machine splices with no components less than 152 millimeter wide.
-
BB core will have no voids, no end
splits, no lap veneers with even core thickness.
-
CC core may have one void equal to
1.6 mm x 102 mm not visible on the face.
|
